Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.
Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4.
Safety: conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1
Tensile test at room temperature: DIN EN 10002-1, ISO 6892, ASTM A370, ASTM E 8
Tensile test on reinforced steel: ASTM A615/A615M, ISO 10606, EN 10080
Compression test: DIN 1048, ISO 6784, ASTM C39, ISO 4506
Tensile test for bolts: ASTM F606-07
Tensile Tests for Strands: ASTM A416, BS 5896, ASTM A1061, ISO 15630 etc.
Verification of testing frame and specimen alignment: ASTM E1012 etc.
HLC series adopts single testing space design with single central hydraulic drive to load on specimen directly to do tensile, compression, bending and shearing tests etc., which totally eliminates the space created by counter force frame structure and testing results are accurate and real.
The single large test space fully considers operation convenience and safety to raise testing efficiency greatly and ensures that the load frame adapts a wide range of specimen sizes, grips, accessories, extensometers, furnance, environmental chambers etc..
Overload protection: when the testing load is over 2%-5% of max. load, the system will unload.
Stroke protection: when the piston arrives at the upper limited position, the motor of oil pump will stop.
Multiple protection functions: overflow protection, current protection, oil overheat protection & filter protection, order upon request.
|Max. load (KN)||50||100||150||200|
|Load measuring range||2~100% F.S.|
|Load accuracy (%)||±0.5%|
|Deformation measuring range||2~100% F.S.|
|Deformation accuracy (%)||±0.5%|
|Test/loading speed (mm/min)||0.5-50|
|Actuator stroke (mm)||200|
|Max. tensile space (mm)||320||290|
|Max. compression space (mm)||600|
|Distance between columns(mm)||360|
|Tensile jaw for flat specimen (mm)||0-21||0-27|
|Tensile jaw for round specimen (mm)||4-20||8-32|
|Width ×height of jaw (mm)||40×55||50×75|
|Hydraulic oil requirement||ISO VG68# or VG46# hydraulic oil|
|Power supply||3 phase, 5 wire, 380V/220V±10%, 50Hz/60Hz, 2kw|
|Dimensions of load frame(mm)||750x510x1600(servo type), 930 x510 x1600(manual type)|
Electromechanical Universal Testing Machine
Hydraulic Universal Testing Machine
Impact Testing Machine
Dynamic Testing System
Creep and Rupture Testing Machine
Compression Testing Machine
Upset Testing Machine
Bending Testing Machine
Torsion Testing Machine
Cupping Testing Machine
Spring Testing Machine
Friction Wear Testing Machine
Load Cell Calibration System
High Temperature Axial Extensometer
Fracture Mechanics Clip-on Gages
Transverse and Diametral Extensometers
High Temperature Transverse and Diametral Extensometers
Rock,Concrete and Asphalt Extensometers
Averaging,bi-axial and axial torsional extensometers
Bolt prool,lap shear and specialty extensometers
Knife Edges for Extensometers
Interface Electronics and Signal Conditioners
Sample Preparation Machine