Single Space Electro-hydraulic Servo Universal Testing Machine

    • Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.

    • Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846 and EN 10002-4.

    • Safety: conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1

    • Tensile test at room temperature: DIN EN 10002-1, ISO 6892, ASTM A370, ASTM E 8

    • Tensile test on reinforced steel: ASTM A615/A615M, ISO 10606, EN 10080

    • Compression test: DIN 1048, ISO 6784, ASTM C39, ISO 4506

    • Tensile test for bolts: ASTM F606-07

    • Tensile Tests for Strands: ASTM A416, BS 5896, ASTM A1061, ISO 15630 etc.

    • Verification of testing frame and specimen alignment: ASTM E1012 etc.


    • WAW-F series adopt single testing space design with single central hydraulic dual-action actuator to drive for loading on specimen directly to do tensile, compression, bending and shearing tests etc., which totally eliminates the space created by counter force frame structure and thus the testing results are more accurate. 

    • The single large test space fully considers operation convenience and safety to greatly raise testing efficiency and ensures that the load frame adapts a wide range of specimen sizes, grips, accessories, extensometers, furnance, environmental chambers etc.. 

    • For load capacity 300kN, it has two-column structure, while for load capacity from 500kN-3000kN, it hasfour-column structure.

    • Long stroke actuator on the top of the machine, load directly on specimen without any gap, which totally elimates the space created by counter force frame structure.

    • Test space is adjusted by the long actuaotr with high speed, test can be done with high effiency.

    • WAW-F series adopt single testing space design with single central hydraulic drive for loading on specimen directly to do tensile, compression, bending and shearing tests etc., which totally eliminates the space created by counter force frame structure and thus the testing results are more accurate. 

    • The single large test space fully considers operation convenience and safety to greatly raise testing efficiency and ensures that the load frame adapts a wide range of specimen sizes, grips, accessories, extensometers, furnance, environmental chambers etc.. 

    • For load capacity 300kN, it has two-column structure, while for load capacity from 500kN-3000kN, it has four-column structure.

    • Long stroke actuator on the top of the machine, load directly on specimen without any gap, which totally elimates the space created by counter force frame structure.

  • 20190831104303357.png@!w1200



  • ModelWAW-300/400FWAW-500F/600FWAW-1000FWAW-1500F/2000F
    Max. Load(kN)300/400500/60010001500/2000
    Load measuring range2~100%F.S. (0.2/0.4~100%F.S optional)
    Load accuracy (%)±0.5/±1
    Deformation measuring range2~100%F.S. (0.2/0.4~100%F.S optional)
    Deformation accuracy (%)±0.5/±1
    Displacement position(mm)0.001
    Test loading speed(mm/min)0.5-70 (0.01-70 if configured with EDCi20  controller & Moog servo valve)
    Max. Crosshead moving speed (mm/min)200
    Stress control range1~60(N/mm2)S-1
    Strain control range0.00025/s~0.0025/s
    Tensile space1(mm)600600700700
    Compression space(mm)450450450450
    Piston stroke(mm)600600600600
    Column Distance(mm)520 (2-column)600x350660x400800x450
    Flat jaw (mm)0-300-300-600-80
    Round jaw(mm)Φ10-Φ3213-Φ40Φ20-Φ60Φ20-Φ80
    Jaw Height(mm)7390110160
    Jaw width(mm)7390110140
    Length of the insert for strands and special samples (mm)225(specimen dia. 12.7 & 15.2mm)150 (specimen dia.9.5mm) Inserts for specimens dia. 11.11mm，17.8mm，18.9mm，21.8mm can be ordered.
    Platen size(mm)Φ150Φ150Φ150/204x204Φ200/204x204
    Oil tank volume(L)ISO VG68# or VG46# hydraulic oil
    6060100200
    Oil pressure (MPa)2626.52626
    Weight of load frame (kg)2300300042008000
    Dimension of load frame3(mm)880x630x2980880x630x2980980x720x35301220x880x4180
    Size of power pack(mm)1000x680x1200
    Shipping dimension (mm)3000×950×1100 2000×900×15003000×950×11002000×900×15003500×1100×12002000×900×15004050×1450×13002000×900×1500
    Power supply3PH, 380VAC, 50Hz, 4.1kW3PH, 380VAC, 50Hz, 5.6kW3PH, 380VAC, 50Hz, 8.6kW3PH, 380VAC, 50Hz, 11.5kW


    Remark：

    1.All models can be ordered with advanced side-action hydraulic parallel grips.

    2.Testing space and actuator stroke can be customized according to specimen length and elongation requirement.


    6.jpg


  • WAW-1000F ONE


    WAW-F Single Space Servo Hydraulic Universal Testing Machine as per ISO6892, ASTM A370, E8, A615, F606, A416, A1034


    PC strands tensile test


    Strands Tensile Test

    https://youtu.be/SLyTJC4mEW0 


Model: WAW-F Series
Description: WAW-F series single space computer control electro-hydraulic servo universal testing machine is suitable to test various high strength metallic or nonmetallic materials for tension, compression and other strengths. The ultra-large testing space & dual-action actuator with longer stroke enable it to do test for not only standard specimen, longer specimen and specimen with larger elongation. Equipped with the electronics, computer & software packages, it is capable of controlling the test procedures as the preset programs, and also displaying, recording, processing and printing the test results. The testing curves can be drawn automatically in real time. It is simple, easy to operate, versatile in the applications & widely used in the fields of metallurgy industry such as steel mills & alloy, reinforced bar etc, aircraft industry, research institutes, laboratories, calibration institutes etc.