Automatic Metallic Pendulum Impact Testing Machine

  • Applications:

    PITD-I Series Instrumented Pendulum Impact Testing Machine is strictly designed according to national standard GB/T3038-2002 “Inspection for pendulum Impact Testing Machine” and GB/T229-1994, ISO148-1, ISO148-2,ISO148-3, DIN 10045 and ASTM E23 and also it can do Izod and tensile impact test with fixtures.  It is mainly used to determine the anti-impact capability of metal materials under dynamic load. Carry out the functions of clear zero and return automatically, capture the value of lost impact energy and pendulum cycle by means of setting up with computer program, and the result can be displayed, stored and printed out. It is widely used in universities, automotive and aero companies, research institutes and steel plants etc.


    Applied standard

    Instrumented technologies can be applied in the following machines:

    1.Metallic Materials Pendulum Impact Tester- Charpy, Izod, Tensile.

    ISO 148, ISO14556, ASTM E23, EN 10045, GB 17948

    2.Metallic Materials Drop Weight Tear Impact Tester 

    ASTM E436

    3.Plastic Materials Pendulum Impact Tester – Charpy, Izod, Tensile.

    ISO 179, ISO180

    4.Plastic Materials Drop Weight Impact Tester 

    ISO 6603, 7765, 3127, 8256; ASTM D3763, D4272, D5628, D2444, 7136, 7192




  • Features of load frame

    Load frame adopts integral design and one body casting process with features torsion-free frame with low friction pendulum bearing , high stiffness and no deformation. Supporter of pendulum adopts single beam（dual arm support) structure and supporting axle get uniform force, which makes deformation quite little at the moment of impact, and robust pendulum arm can also reduce the deformation of impact moment. Anvil and base are integral structure and designed strictly as per ASTM E23, which greatly reduces friction between specimen and anvil so as to guarantee the correctness of test results.

    • Pendulum raising system: it consists of motor, reducer and disc friction clutch etc. with features of working at lower noise, stable running, quick clutch & reliable brake etc. Conventional motors with mature technology & good reliability. The friction clutch with prompt action, good reliability and low noise.

    • With servo motor, impact test can be done by setting energy, drop height and drop angle.

    • Pendulum releasing & locking device: it mainly includes pneumatic release cylinder.

    • Safety door is provided. The safety enclosure surrounding complete machine. Only the door is closed, the trigger of the pendulum and any action of the machine works. Also the door is with function of door closed testing function. When doing batch tests, after door is closed, the test will be automatic started. 

    • Safety shield is made by Aluminum and perspex. Also the machine is with single lamp with light and shows the machine is in good working condition and also safety status.  

    • Sample collection box is at side of the base of the machine to collect the broken samples. 


  • Instrumented Impact Testing System

    They can be equipped with high precision instrumented strain-gauged  striking edge & high-speed data acquisition system. This instrumented test system can measure the force of a test specimen during an impact event. Then, the instrumented test data can be used to calculate the energy absorbed by the test specimen. In addition, the crack initiation and arrest loads can be used in fracture mechanical models


    Features:

    The instrumented system is very accurate and versatile. Some important system features are listed as follows.

    1. Up to 1000.000 data points per test

    2. Data acquisition time ranges from microseconds up to 100 milliseconds (longer acquisition times available)

    3. User friendly software controls acquisition and data analysis

    4 Optical encoder data can be read and stored automatically

    5. The whole system includes:

    • computer

    • high speed 12 bit acquisition board

    • strain gage amplifier

    •  instrumented striker

    • flat panel monitor, optical mouse and keyboard

    • hardware/software manual

    • software


  • 1. Impact energy: 450J Izod(option 750J)

    2. Impact velocity: 5.24m/s 

    3. Max. raised angle :150º

    4. Standard span: 40mm

    5. Resolution: 0.01J

    6. Round angle of jaws: R1-1.5mm

    7. Round angle of striking Edge: R2-2.5mm (ISO148)

    8. Round angle of striking edge: R8 (ASTM E23) (optional)

    9. Size of specimen: 10 x 10 x 55mm,sub-size: 7.5mm, 5mm and 2.5mm

    10. Power supply: 3 phs, 415V/380V/220V, 50/60Hz, 550W

    11. Dimensions: 2100 x 830 x 2100mm

    12. Net Weight: 900kg

    13. Friction and windage losses of the machine during pendulum swing is within 0.5%


Model: JB-A
Description:
JB-450/750A automatic type pendulum impact tester is used to determine the impact resistance of metal materials under dynamic load and is capable of doing a large number of impact tests continuously. The automatic type pendulum impact tester can display the impact power, impact toughness, and the pendulum’s rotation angle. All the testing reports can be printed out. JB-450/750A can be equipped with fully automated sample feeding system, which greatly improves the test efficiency, and reduce labor intensity. The cryogenic cooling device is available for impact tests under the lowest temperature down to -196 ° C. The automatic type pendulum impact testing system is the essential quality control equipment for metal material manufacturers and QC departments, as well as the necessary instrument of research institutes for new material research.