Safety: This machine conforms to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
This series environmental chamber is designed to fit between the columns of a materials testing machine on a suitable mounting. Ports located in the upper and lower surfaces of the chamber allow pull rods to be inserted to which grips and fixtures are attached for operation within the chamber.
It adopts liquid nitrogen as cooling media or compressor for cooling and electric resistance wire for heating.
It can be with large observation window if video extensometer will be configured for strain measurement under the climatic condition.
It consists of chamber body, heating unit, intelligent PID temperature controller, temperature sensor, high & low temperature grips/fixtures, liquid nitrogen container/LN2 Dewar and moving trolley etc.
Item
Specification
Remarks
Chamber
Temp. Range
-190°C to +350°C
Including the corresponding pull rod
Accuracy
±0.1°C
Temp. Fluctuation
±3°C or customized
Effective Space
300x240x450mm(W×D×H)Or customized
Heating mode
Heating by electric resistance wire
Cooling mode
Cooling by LN2 or compressor
Moving Bracket
Equipped according to the dimension of the load frame
Model: HLT Series Description: It is specially designed for universal testing machine to do tensile test for metallic & non-metallic materials under the required temperature condition. It adopts liquid nitrogen as cooling media or compressor for cooling and electric resistance wire for heating. It can be with large observation window if video extensometer will be configured for strain measurement under the climatic condition. It consists of chamber body, heating unit, intelligent PID temperature controller, temperature sensor, high & low temperature grips/fixtures, liquid nitrogen container/LN2 Dewar and moving trolley etc. it is widely used in universities, R&D institutes and industrial factories etc.