Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.
Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.
Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.
Specimen is ‘X’ style, which is fixed in the center of the testing machine. The four boundaries of the specimen are fixed by the grip. The displacement sensor is fixed in the center of specimen. As equipment that applying load, the servo motor is fixed at the bottom of leading screw, and at the same time, the value of load is recorded by sensor. There is a displacement sensor at the center of specimen which can transfer the value of displacement. Using these data, the software can protract load-displacement curve. As the two servo motor are located in two directions (warp and weft) and can work at the same time, this biaxial tensile machine can do biaxial test and to-and-pro test.
The biaxial tensile testing machine consists of mechanical system and control system: mechanical system includes load frame, membrane specimen fixtures, servo motors(Japan), load sensors, displacement sensor and other components, while control system with the computer and software;
Mechanical part structure
Front view Upwards view
1. leading screw, 2-fixing unit for leading screw, 3-clip for membrane, 4-fixing plate, 5-displacement sensor, 6-tensile load sensor, 7-installation for load, 8-main frame
Testing Curves for reference
(a) Load-displacement curve of single-axis tensile process, (b) Load-displacement curve of single-axis loading-unloading process, (c) Load-displacement curve of biaxial tensile process
Max. tensile load measuring range for longitude & latitude): up to 50kN
Testing speed: 0.5-100mm/min
Max. stroke: 300mm
Ration of test load: 1:1, 1:2, 1:3 and 1:4;
Load accuracy: ±1%
Data output: the testing curves can be output to computer (including single axial testing & biaxial testing curves);
Power supply: 380V /220V drive power.
Electromechanical Universal Testing Machine
Hydraulic Universal Testing Machine
Impact Testing Machine
Dynamic Testing System
Creep and Rupture Testing Machine
Compression Testing Machine
Upset Testing Machine
Bending Testing Machine
Torsion Testing Machine
Cupping Testing Machine
Spring Testing Machine
Friction Wear Testing Machine
Hydrostatic Pressure Testing MAchine
Load Cell Calibration System
High Temperature Axial Extensometer
Fracture Mechanics Clip-on Gages
Transverse and Diametral Extensometers
High Temperature Transverse and Diametral Extensometers
Rock,Concrete and Asphalt Extensometers
Averaging,bi-axial and axial torsional extensometers
Bolt prool,lap shear and specialty extensometers
Knife Edges for Extensometers
Interface Electronics and Signal Conditioners
Sample Preparation Machine