In Situ Testing Machine


    • Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.

    • Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.

    • Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1.



  • Features: 


    • Keep the sample in situ during whole test.

    • It can be integrated with SEM, XRD, AFM, optical microscope, video extensometer.

    • Light structure, low power consumption, small footprint.

    • Suitable for samples as steel, polymers, composites, biological life science, geology, foodstuff, textile etc. 



  • Bi-axial In-situ tensile table, Quad-axial In-situ tensile table


    • Servomotor 2 independent driving systems, keep the sample in situ.

    • Operation and speed of X / Y can be set separately

    • Speed range: 0.001-50mm/min


    20190418171834844.png


    20190418171834976.png


    20190418171834663.png


    Video extensometer: 


    • Non-contact

    • Geometry independent 

    • 2D and 3D DIC measurement 

    • Full-field measurement

    • Easy specimen preparation

    • Strain control (options)

    • Play back to past test 


    20190418171839228.png@!w1200


    20190418171839770.png@!w1200



    • Max. load: 50-25,000N (50N, 100N, 200N, 500N, 1kN, 2kN, 5kN, 10kN, 25kN)

    • Stroke of the displacement: 0-50mm

    • Test frequency: 0.001-5Hz.

    • Load accuracy: ± 0.5%

    • Displacement accuracy: ± 0.5%

    • Resolution of displacement: 0.01um

    • Speed range: 0.001-50mm/min.

    • With Electronic calibration modular


Model: IST Series
Description: In-situ testing machine is used to test the mechanical properties of micro-specimens. It can integrate video extensometer, scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectrometer, atomic force microscopy (AFM), metallographic microscope and other imaging equipment to dynamically monitor the micro-deformation and damage of materials. The purpose of this study is to provide a means of testing the micro-mechanics, damage mechanism of various materials and products, and the relationship between load and material properties. It can do in situ tensile, compression, bending, shear test, creep, relaxation and other performance tests. It can be used independently to complete the mechanical properties test of materials, and can cooperate with various micro-instruments to carry out in-situ micromechanical testing, and also work with heating, cooling, liquid environments. With special order, bi-axial tensile table, quad-axial tensile table, In situ dynamic test table can be achieved.