Multiple Test-Station Tensile Testing Machine for rubber/polymer
    • Load meets or exceeds the following standards: ASTM E4, ISO7500-1, EN 10002-2, BS1610, DIN 51221.

    • Strain measurement meets or exceeds the following standards: ASTM E83, ISO 9513, BS 3846, EN 10002-4.

    • Safety: This machine shall conform to all relevant European CE Health and Safety Directives EN 50081-1, 580081-1, 73/23/EEC, EN 61010-1

  • The frames all incorporate human factor considerations in the design to ensure safety, reduce operator fatigue, and provide the highest level of flexibility. Extremely robust crosshead guidance is incorporated in all frame designs providing the highest level of lateral crosshead stiffness.

    Load cell is with high accuracy interchangeable for all frames allowing each frame to operate full capacity. 

    High accuracy: The preloaded precision ball-screw with high speed low noise ensures high speed and position measurement accuracy and less noise.

    High stiffness: The load frame is with 4 columns and heavy duty pre-loaded bearings.

    Safety features: The testing machine stops automatically when the change in the test force exceeds a specified value during operations.

    Large space in the working area: The insides of columns provide wide space for the operator.

    Over-stroke limiter: The range of the crosshead movement mechanically limited.

    Comfortable working area

    The wide legroom under the load unit provides a comfortable working area for attaching and removing jigs.

  • 2.jpg

    • Load capacity: 100N, 200N, 500N, 1kN, 2kN or 5kN

    • Load measuring range: 0.4%~100%FS.

    • Load accuracy: Class 0.5

    • Load resolution: 1/500,000FS

    • Deformation accuracy: less than ±0.5%

    • Displacement resolution: 0.025μm

    • Displacement accuracy: ±0.02mm or 0.5% of displacement (whichever is greater)

    • Crosshead speed range: 0.001-1000mm/min

    • Crosshead speed accuracy: ±0.5% of set speed (zero or constant load)

    • Total crosshead travel with rubber grip: 800mm

    • Space between columns: 720mm (7-station); 520mm (5-station);

    • Twin ball screw driven with close-loop and servo motor control.

    • Power supply: 220VAC, 1 phase, 50Hz

    • Overall dimension: 1050x500x1645mm 

    • Weight: 300kg 


Model: WDW-xxC Series
Description: Multiple test station tensile testing Machine is specially designed for extensive nonmetallic materials like surgical glove rubber, long elongation polymer or plastics etc for tension, compression, puncture, peel tests etc. with multiple test station design, it greatly improves the test efficiency as QC of factory. It features as high precision, high stability as well as high reliability. Equipped with PC system & printer, graph, test result display, data processing and printing can be done easily.
This testing system is recommended for high-volume repetitive testing for plastics, film, elastomer and rubbers. Multi-grips in one space are fast test for same size sample. Optional multi- long travel extensometer and climatic chamber can be offered upon request for elongation and climatic environmental test.